DRX GRP Rust Remover

Doctor X GRP Rust Remover

Application: Eco-friendly product

Test the product in an invisible location before applying it on a large scale.
Spray the parts or immerse them in ‘DRX GRP rust remover’.
Wait 3 to 5 minutes, the rust stain begins to dissolve.
Spray the treated part with a hose or high-pressure cleaner. Repeat steps 3 and 4 until the rust stain has completely dissolved.
To speed up the process, use a scrubbing brush.
Use a blower (e.g. a garden blower) to dry the surface. Do not use a compressed air compressor as this sprays oil and water.
‘DRX GRP Rust Remover’ must not be applied to aluminium. The application is safe for metal, paint, glass fiber (GRP) as well as most coatings.
Safety note: Use latex gloves and goggles.

Warning: Don’t get into your eyes, don’t drink!

In case of emergency: If in contact with the skin, rinse with cold water for 15 minutes, repeat if necessary. If taken to drink large amounts of cold water, contact the medical emergency immediately. In case of eye contact, rinse with cold water for 15 minutes and contact a doctor.

Storage: Store in a cool place protected from direct sunlight and children.

CHF 88.00

Clear