DRX GRP Hull Cleaner
Application: Eco-friendly product
Test the product in an invisible location before applying it on a large scale.
Spray the parts or places to be cleaned with DRX GRP hull cleaner.
Wait 3 to 5 minutes, dirt and stains begin to dissolve. Repeat the process until stain or dirt are removed.
Rinse with water hose or high-pressure cleaner.
To speed up the process, use a scrubbing brush
Dry with a blower (e.g. garden blower). Do not use a compressed air compressor as this sprays oil and water.
DRX GRP hull cleaner must not be applied to aluminum. The application is safe for metal, paint, glass fiber (GRP) as well as most coatings.
Safety note: Use latex gloves and goggles.
Warning: Don’t get into your eyes, don’t drink!
In case of emergency: If in contact with the skin, rinse with cold water for 15 minutes, repeat if necessary. If taken to drink large amounts of cold water, contact the medical emergency immediately. In case of eye contact, rinse with cold water for 15 minutes and contact a doctor.
Storage: Store in a cool place protected from direct sunlight and children.