DRX Metal Rust Remover
Application: Eco-friendly product
Test the product in an invisible location before applying it on a large scale.
Spray the parts or immerse them in DRX Metal Rust Remover.
Wait 5 to 10 minutes, then rinse the part to be rusted with a hose or high-pressure cleaner.
Dry with a blower (e.g. garden blower). Do not use a compressed air compressor as this sprays oil and water.
As soon as the part to be rusted is completely dry with DRX metal spray rust protection or primer to prevent further rust formation.
DRX Metal Rust Remover must not be applied to aluminum. The application is safe for metal, paint, glass fiber (GRP) as well as most coatings.
Safety note: Use latex gloves and goggles.
Warning: Don’t get into your eyes, don’t drink!
In case of emergency: If in contact with the skin, rinse with cold water for 15 minutes, repeat if necessary. If taken to drink large amounts of cold water, contact the medical emergency immediately. In case of eye contact, rinse with cold water for 15 minutes and contact a doctor.
Storage: Store in a cool place protected from direct sunlight and children.